Thank you for sending your enquiry! One of our team members will contact you shortly.
Thank you for sending your booking! One of our team members will contact you shortly.
Course Outline
Intensive ETAP
System Modeling and Load Flow Analysis
- ETAP Interface & One-Line Diagram (OLD)
- Navigating the Graphical User Interface (GUI) and Project Toolbar.
- Constructing a reliable One-Line Diagram: incorporating Busbars, Transformers, Generators, and Loads.
- Managing Element Libraries and Property Editors.
- Load Flow Analysis
- Configuring Study Cases and solution parameters.
- Comprehending the Newton-Raphson, Fast Decoupled, and Adaptive Newton-Raphson methodologies.
- Practical Application: Executing Load Flow studies, interpreting outcomes (such as voltage drops and power factors), and utilizing the "Alert View" to detect overloaded components.
Short Circuit & Motor Starting Studies
- Short Circuit Analysis
- Overview of IEEE and IEC standards for fault calculations.
- Evaluating 3-phase, Line-to-Ground, Line-to-Line, and Double Line-to-Ground faults.
- Establishing the Duty and Breaking capacity of Circuit Breakers.
- Motor Starting Analysis
- Modeling static versus dynamic motor starting scenarios.
- Assessing the impact of "Voltage Dip" on the broader system during motor acceleration.
- Practical Application: Comparing "Direct-on-Line" (DOL) starting against Star-Delta or VFD methods within the simulation environment.
Protection Coordination & Network Simulation
- Protective Device Coordination (Star View)
- Introduction to the ETAP Star (Protection & Coordination) module.
- Integrating Overcurrent (50/51) and Ground Fault (50N/51N) relays.
- Drawing Time-Current Characteristic (TCC) curves.
- Selectivity and Discrimination
- Modifying relay settings to ensure only the faulty section is isolated.
- Validating transformer damage curves and cable thermal limits.
- Hands-on Workshop: Distribution Network Simulation
- Capstone Project: Designing a standard distribution network from the ground up.
- Conducting a comprehensive study encompassing Load Flow, Short Circuit, and Coordination analyses.
- Generating final reports and visualizing results.
Basic GIS Training:
- Concepts and applications of GIS
- Introduction to ArcGIS Pro
- GIS Data Types and Formats
- Geodatabase creation and data handling
- Map preparation techniques
GIS Mapping:
- Preparing base data using satellite or drone imagery
- Working with attributes
- Utilizing Geoprocessing tools
- Analyzing GIS data
- Pole data processing
- Consumer data processing
- Designing map templates
- Cartographic mapping
Requirements
70 Hours
Testimonials (3)
Learning that the QGIS and a tool that can used by other different professionals such land survey
Bame Duncan Koko - Bentel Technologies (Pty) Ltd
Course - QGIS for Geographic Information System
How to use open satellites data for real applications
Tshering Dorji - Druk Holding and Investments
Course - Advanced Geographic Information Systems (GIS)
Hands-on examples allowed us to get an actual feel for how the program works. Good explanations and integration of theoretical concepts and how they relate to practical applications.
